Blastcor® BM-200

Blast machine

BlastcorBlast Machine-200
200 l
up to 37 m2/h
4 - 8,3 bar
  • Tank capacity, l
    200
  • Perfomance, m2/h
    up to 37
  • Working pressure, bar
    4 - 8,3
  • Air consumption, m3/min
    4,5 - 10
  • Pneumatic line, inch
    1 1/4"
  • Weight, kg
    151
  • Dimensions, mm
    870х960х1500
  • Made in
    Russia Russia
Components
  • Sieve, cover
  • Moisture separator MMS 32
  • Abrasive metering valve SANDSTURM® 
  • Silencer
  • Abrasive blasting hose couplings CQT-2
  • Nylon nozzle holder NHP-2
  • Manual

It is designed to clean various surfaces from corrosion products, old paint, scale, oil, lubricants, and other foreign substances, leaving ideal surface for the application of protective anticorrosion coating.

AREA OF APPLICATION

It is used for abrasive blasting works at construction sites, for repair or building of road and railway bridges, at oil refineries, tank storage farms of oil, shipbuilding and ship repair yards.

ABRASIVE MEDIA

Supplied with Sandsturm® multipurpose abrasive metering valves, which allow working with any common abrasives 0,1 to 4 mm grade: cast-iron and steel shot and grit, marble and granite chips, glass beads, aluminum oxide, silicon carbide, alundum, copper and nickel slag and other kinds of media fabricated specially for blasting.

Its work is performed by means of introduction of abrasive material through the abrasive metering valve SANDSTURM®-P and compressed air through the air line into a pusher line assembly.

After mixing in the adjusted proportion abrasive-air mixture is supplied to the abrasive blasting hose at high pressure and is directed on to the surface that is being treated, passing through the abrasive blast nozzle and speeding up.

  • Perforated sieve
    Perforated sieve

    The sieve is located inside that reduces the overall height of the blast machine and makes it easier to load it with abrasive. A thick perforated metal sheet with openings of 4 mm is used as a sieve. A perforated sieve is more effective for screening abrasive material than a sieve made of wire mesh. It protects the blast machine from particles more than 4 mm diameter and different types of debris that prevent uninterrupted operation of the equipment. To protect the device, they use a lightweight metal edge-raised cover, the edges of which hang over the walls of the setting and prevents the passage of moisture into the machine.

    more
  • Increased diameter wheels
    Increased diameter wheels
    • Equipped with two sets of wheels, one of increased diameter and one additional set
    • In working position, the blast machine loaded with abrasive, stands on three strong pillars without relying on the wheels, which prolongs their service life. Wonderful balance makes it easy to bring the blast machine into transport position even with abrasive material located inside and transport it by hand over long distances.
    more
  • Couplings CLAMP
    Couplings CLAMP

    Couplings CLAMP allow you to take off the valve and discharge the abrasive from the blast machine in 5 seconds, remove the foreign object, which prevents the normal uninterrupted work, or replace the valve for its repair.

    more
  • Silencer
    Silencer

    Silencer reduces level of discharge air noise during machine depressurizing and traps abrasive particles for safe operation. 

    more
  • Moisture separator MMS-32
    Moisture separator MMS-32

    They are equipped with high-efficiency air filter moisture separator MMS-32 for preventing of ingress of moisture, oil and other contaminants into the blast machine.

    more
  • Conical bottom 90°
    Conical bottom 90°

    A conical bottom has an angle of 90° providing the best discharge of abrasive material from the walls of the blast machine and prevents the absorption of moisture on the walls of the tank.

    more
  • Metering valve
    Metering valve
    • High-performance metering valve SANDSTURM®.
    • Precise adjustment of abrasive feed regardless of its fraction and composition, from glass beads of a few microns diameter to cut iron shot, granite or garnet of up to 4mm diameter.
    • Screw pair with a progressive screw for faster and more accurate adjustment of the dispensing of the volume of supplied abrasive.
    • The design of the dispenser allows you to enter abrasive into the mixing chamber at an angle of 45˚ to achieve maximum performance when using different abrasives.
    more
  • Inspection hatches
    Inspection hatches

    Bigger diameter inspection hatches for easy access to internal components.

    more
eac
  • Все пескоструйные аппараты Blastcor® - BM сертифицированы на соответствие техническому регламенту Таможенного Союза ТР ТС.
  • Регистрационный номер декларации о соответствии ТС № RU Д-RU.АВ45.В.36364
  • Вы можете получить оборудование путем самовывоза с нашего склада, находящегося по адресу: г. Санкт-Петербург, ул. Предпортовая д. 6.
  • Наша компания осуществляет бесплатную доставку до терминала любой выбранной Вами транспортной компании.
  • Доставка осуществляется во все регионы России.
914
Ask a question
г. Санкт-Петербург, пр. ленинский, 153, оф. 208 БЦ SetlCenter
+7(812)6458999
request a call