Blastcor® BC-130

Suction blast cabinet

Blastcor Blast Cabinet - 130
1-3 m2/h
5-8 bar
  • Perfomance, m2/h
    1-3
  • Working pressure, bar
    5-8
  • Air consumption, m3/min
    0,8-3
  • Weight, kg
    278
  • Dimensions, mm
    1210x1050x1950
  • Side loading aperture dimensions, mm
    900х770
  • Front loading aperture dimensions, mm
    1150х710
  • Viewing window dimensions, mm
    600х300
  • Power, v
    ~220
  • Guarantee, months
    12
  • Made in
    Россия Россия
Components
  • Blast chamber
  • SGI injection gun complete with boron carbide abrasive blast nozzle
  • Protective gloves
  • Injection device “iD”
  • Сontrol pedal
  • Abrasive feed hose ∅19 mm
  • Air feed hose, polyurethane ∅ 12 mm 
  • Manual

It is used for removing burrs, scale, rust and old paint, roughness smoothing, polishing, and for working of non-metallic surfaces. A distinctive feature of this chamber is small consumption of compressed air. Stable work without pulsation is achieved in the presence of compressed air in a volume of 0,8 m3/min at a pressure of 5-8 bar.

FEATURES

Blastcor® BC-130 cabinet has enlarged doors and a large work area that allows the operator to work not only small but also large-sized products. On request, the chamber can be manufactured both with front and side loading of products.

ABRASIVE MEDIA

Supplied with Sandsturm® multipurpose abrasive metering valves, which allow working with any common abrasives 0.1 to 1.2 mm grade: cast-iron and steel shot and grit, glass beads, silicon carbide, alundum, copper and nickel slag and other kinds of media fabricated specially for blasting.

MANUFACTURING OF BLAST CABINETS BY ORDER

In addition to serially manufactured equipment, our company produces blast cabinets in accordance to individual customer's requirements.

The operator places the workpieces on the rack and directs the abrasive-air jet onto the surface, holding the blasting gun “SGi” through special openings in the chamber with his hands.

Thanks to the construction of the jet pistol, vacuum is created under the air nozzle, and abrasive material is collected through the abrasive hose by the lower pipe of the collecting hopper of the chamber and is fed into the blast nozzle of the gun. 

  • Reliability
    • Robust wear-resistant construction, the cabinet is made of steel sheet of 2,5 mm.
    • The inner surface of the chamber is lined with special wear-resistant rubber to prevent abrasion.
    • Completed with an LED spotlight, mounted outside the cabinet to prevent wear.
    more
  • Safety
    • Completed with high-strength gloves with textile lining. The gloves protect the hands of the operator from direct contact with abrasive and prevent static shock.
    • The viewing window of the chamber is made of multilayer triplex glass.
    • The cabinet is equipped with an automatic stop system of blasting process in case of unauthorized opening of the door.
    more
  • Efficiency and convenience of work
    • Blastcor® BС-130 is equipped with openings for long products
    • Blast cabinet BC-130 is equipped with the system of removing and cleaning of dirty air in the work area, which allows using it in a workplace, without connecting to the ventilation system. Continuous automatic cleaning of the filter element short pulse of compressed air significantly extends the cartridge life and allows the operator to not stop the workflow to clean it. Recovery system of abrasive media can be installed on either side of the blast cabinet, which will organize a work space with minimum dimension.
    • Pockets for fork loaders forks and eyelets make it easy to move it in any convenient place. Cabinet comes with SGI injection gun.  SGI it is ergonomic handle gun, which allows the operator to perform the working of products in any plane without significant physical efforts. Blast nozzles made of boron carbide used in SGI gun and the air nozzles of different diameters allow   to operator to work at the peak of performance and to clean the products to SA 3 class.
    more
eac
  • Все пескоструйные камеры Blastcor® - BC сертифицированы на соответствие техническому регламенту Таможенного Союза ТР ТС    
  • Регистрационный номер декларации о соответствии   ТС № RU Д-RU.АВ45.В.37207
  • Вы можете получить оборудование путем самовывоза с нашего склада, находящегося по адресу: г. Санкт-Петербург, ул. Предпортовая д. 6.
  • Наша компания осуществляет бесплатную доставку до терминала любой выбранной Вами транспортной компании.
  • Доставка осуществляется во все регионы России.
532
Ask a question
г. Санкт-Петербург, пр. ленинский, 153, оф. 208 БЦ SetlCenter
+7(812)6458999
request a call